Description and Specification for Lab Tenders
Vertical Turning & Facing Heavy Duty Lathe.
STANDARD ACCESSORIES : One Ram Head on Cross Rai Automatic lifting of the Cross Rail Jaw chucks - 4 Nos. Centralised Lubrication System Thyristor centralised DC drive for stepless Table speed. Antifriction material coating on main slide for smooth feed motions. Fully centralised control stations. SPECIAL ACCESSORIES : Additional Ram head on Cross Rail Turret head on Cross Rail Threading head on Cross Rail Side Ram Head Grinding Head
| Size of Machine | 600 mm | 1000 mm | 1500 mm | 2000 mm | 2500 mm | 3000 mm | 4000 mm |
| Diameter of job table | 500 | 900 | 1300 | 1800 | 2300 | 2800 | 3800 |
| Max. Diameter Admit | 800 | 1050 | 1600 | 2200 | 2750 | 3250 | 4250 |
| Max. Height under Cross Rail | 400 | 600 | 1200 | 1500 | 1700 | 1800 | 2000 |
| 900 (optional) | |||||||
| Vertical travel of turret | 300 | 410 | 500 | 700 | 750 | 750 | 1000 |
| Table speeds (Nine) low Range | 32-66-120 | 3 To 120 RPM | 3 To 120 RPM | 0.75 To 30 RPM. | 1.5 To 100 RPM. | 1.5 TO 100 RPM. | 1.5 To 100 RPM. |
| high Range | 65-133-240 | ---- | ---- | ---- | ---- | ---- | ---- |
| Main Drive Motor | 2.2 Kw 2 speed | 3.7 Kw | 5.5 Kw | 11 Kw | 12 Kw | 15 Kw | 17.5 Kw |
| 700/1444 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | 1440 RPM | |
| Rapid Drive Motor | 1.1 KW 1400 RPM | 1.5 KW 1400 RPM | 1.5 KW 1440 RPM | 3.7 KW 1440 RPM | 5 KW 1440 RPM | 7.5 KW 1440 RPM | 10KW 1440 RPM |
| Cross Slide elevating motor | 1.5 Kw 1440 RPM | 1.5 Kw 1440 RPM | 2.2 KW 0.005 RPM | ---- | ---- | ---- | ---- |
| Three feed rate are available | 0.102 Per/min | 0.005/01/.015 | 0.025 to 1MM | To 40 Thou | ---- | ---- | ---- |
| for each Table Speed. | 0.227 Per / min | ---- | ---- | ---- | ---- | ---- | ---- |
| 0.425 Per / min | ---- | ---- | ---- | ---- | ---- | ---- | |
