Description and Specification for Lab Tenders
All Geared Radial Drill.
Standard Accessories Box Table, Electric Motors
AC/400/440 Volts, Panel Board for Centralised electrical
Controls and Limit Switches.
Machine Lamp, Coolant Pump Complete with fittings, Set of Foundation Bolt, Instruction Manual, Spare part List & Tool Box
Special Accessories :
Machine Vice, Boring Attachment, Tapping Attachment, Drill Chuck, Socket & Sleeves & Tilting Table
Drilling Capacity (in Steel / Cast Iron) 32/40 40/50 50/60 50/60 50/60 65/75 75/85
Drilling Depth 140 180 225 225 220 325 355
Taper Spindle Nose Socket
MT-3 MT-4 MT-5 MT-5
MT-5 MT-5 MT-6
No. of Spindle Speeds & Range (RPM)
6(72-1000) 6(55-665) 9(45-695) 9(45-695) 12(45-1000) 12(18-810) 12(18-810)
No. of Spindle Feeds & Range (mm/rev.) 2(0.1 & 0.2)
3(0.1 to 0.2) 3(0.1 to 0.2) 3(0.1 to 0.2) 6(0.125 to 1.25)
6(0.125 to 1.25)
6(0.125 to 1.25)
Drill Power 1.5 Kw. 1.5 Kw. 2.2 Kw. 2.2 Kw. 3.7 Kw. 3.7 Kw. 5.5 Kw.
CAPACITY
Drilling Radius : Maximum (A) 750 1050 1100 1100 1300 1700 1900
Minimum (B) 350 375 450 450 450 500 600
Drilling Head Transverse (C) 400 675 650 650 850 1200 1200
DISTANCE BASE PLATE TO SPINDLE
Maximum (P) 835 1000 1300 1300 1500 1500 1750
Minimum (M) 275 225 225 225 300 300 200
Diameter of Column Sleeve (D) 190 255 310 310 310 355 405
WORKING SURFACE OF BASE PLATE
Length x Width 750 x
650 900 x
680 920 x
830 920 x
830 1120 x 830 1500 x 1020 1625 x
900
DIMENSIONS OF BASE PLATE
Length x Width x Height 1170 x 670 x
160 1480 x 700 x
200 1585 x 850 x
200 1585 x
850 x
200 1800 x 850 x
200 2265 x 1040 x 225
2650 x 1180 x
225
OTHER DETAILS
Arm Elevating Motor 0.75 Kw 0.75 Kw 1.5 Kw. 1.5 Kw. 1.5 Kw. 2.2 Kw. 3.7 Kw.
Standard Box Table (mm) 400 x
350 x
350 400 x
350 x
350 550 x
420 x
420
550 x
420 x
420 550 x
420 x
420 600 x
500 x
500 600 x
500 x
500
Approximate Weight of Machine 1100 Kgs 1700 Kgs 3000 Kgs 3000 Kgs 3500 kgs 4800 Kgs 6500 Kgs
